How to Set up IV Piggyback Pump: A Nurse's Guide to Secondary IV Tubing with Pump

by Sara Alvarado

Updated July 10, 2024
As a nurse, one of the essential skills you'll need to master is setting up an IV piggyback pump. This skill ensures the safe and accurate administration of medications to patients. In this guide, we'll walk you through the step-by-step process of setting up an IV piggyback pump.

Steps of Setting Up an IV Piggyback Pump

Let’s delve into the steps:

Step 1: Gather the Necessary Equipment

Before starting, gather all the equipment you'll need:
• Primary IV Tubing
• Secondary IV Tubing
• Primary Fluids
• Secondary Fluids
• Sterilized Gloves
• Flush Bag
Electronic Infusion Pump
• IV pole
• Alcohol swabs

Step 2: Ensure Proper Hand Hygiene

Before handling any equipment, it's crucial to wash your hands thoroughly to prevent the spread of infections.

Step 3: Verify Doctor's Orders

Check the doctor's orders to confirm the medication and dosage prescribed for the patient. Ensure accuracy before proceeding with the setup. You need to check the five rights to see if the medication is correct.

Step 4: Explain IVPB Procedure

You need to explain the IVPB procedure to your patient because it is the basic right of any patient that needs to go through some procedural phase.

Step 5: Assess the IV Site

Examine the patient's IV site for signs of infection, infiltration, or phlebitis. If the site is suitable, proceed with the setup. If not, consult with the healthcare team for further instructions. Make sure the IV of patient is working properly.

Step 6: Prime the Tubing

Prime the IV tubing with the prescribed IV solution to remove any air and ensure proper medication delivery. You need to make sure there is no air bubble present in the line so that the fluid passes through the line smoothly.

Step 7: Attach the IV Bag to the IV Pole

Securely attach the IV bag to the IV pole at an appropriate height for infusion. Ensure the bag is stable and won't tip over during the process.

Step 8: Connect the Tubing to the IV Catheter

Carefully connect the primed IV tubing to the patient's IV catheter. Ensure a secure connection to prevent leaks or disconnections during the infusion. Here you need to confirm the roller clamp is not opened right below the fluid chamber.

Step 9: Start Infusion

Open the roller clamp on the secondary tubing to initiate the infusion. Monitor the infusion closely for any signs of complications or adverse reactions.
Adjust the pump settings as needed based on patient response.

Step 10: Back Prime an IV Piggyback

For the secondary set, it should be places higher so that the flow of medicine perfectly travels from the primary set. Additionally, it helps in removing air bubbles if found any.

Step 11: Program the Pump

Program the IV pump with the prescribed infusion rate and settings. Double-check the settings for accuracy before starting the infusion. Now release the roller clamp and you’ll notice the IVPB is normally functional.

Step 12: Document the Procedure

Record the initiation of the secondary IV infusion in the patient's medical chart. Document the medication administered, infusion rate, and any relevant patient assessments.

Step 13: Monitor the Patient

Once the pump is programmed and the infusion has started, closely monitor the patient for any adverse reactions or complications. Stay attentive throughout the infusion process. Keep an eye on the patient for any adverse reactions.

Guidelines for Trainees

1. Patient Assessment: Before initiating the IV piggyback setup, it's essential to assess the patient's overall condition, including vital signs, fluid status, and any existing IV lines or devices.

2. Compatibility Check: Ensure compatibility between the primary IV solution and the piggyback medication. Some medications may not be compatible with certain IV solutions or may require special considerations.

3. Labeling: Properly label the IV piggyback solution with the patient's name, medication name, dosage, and infusion rate to prevent errors in administration.

4. Documentation: Document the setup process, including the medication administered, dosage, infusion rate, and any observations or patient responses during the infusion.

5. Patient Education: Provide education to the patient or caregiver about the purpose of the IV piggyback infusion, expected effects, potential side effects, and any precautions to take.

Things to Consider While Setting Up Secondary IV Tubing with Pump

Certainly! When setting up secondary IV tubing with a pump, it's crucial to adhere to precautionary measures to ensure patient safety and the effectiveness of the infusion. Here are some essential precautionary measures:

1. Hand Hygiene: Always perform hand hygiene before and after any patient contact or procedure, including setting up IV tubing. This helps prevent the transmission of pathogens and reduces the risk of infection.

2. Personal Protective Equipment (PPE): Wear gloves during the setup of IV tubing to minimize the risk of contamination and protect yourself and the patient from potential exposure to blood-borne pathogens or infectious fluids.

3. Sterile Technique: Maintain a sterile field when handling IV tubing and equipment. Use sterile gloves and sterile supplies to prevent introducing microorganisms into the IV system, which could lead to infection.

4. Medication Compatibility: Verify the compatibility of medications or fluids being administered through the secondary IV line with the primary IV solution. Mixing incompatible medications can lead to chemical reactions or precipitation, which may compromise patient safety.

5. Labeling: Clearly label all IV tubing, medication containers, and infusion pumps with the patient's name, the name and dosage of the medication, and the date and time of initiation. Proper labeling helps prevent medication errors and ensures accurate documentation.

6. Site Selection: Choose an appropriate site for the secondary IV infusion, considering factors such as vein accessibility, stability of the IV access, and compatibility with the primary IV line. Avoid areas with signs of inflammation, infiltration, or phlebitis.

7. Patient Assessment: Perform a thorough assessment of the patient's condition before initiating the secondary IV infusion. Assess vital signs, fluid balance, and any potential contraindications or allergies to the medications being administered.

8. Monitoring: Monitor the patient closely throughout the infusion process for any signs of adverse reactions or complications, such as infiltration, extravasation, or allergic reactions. Promptly address any concerns and document observations in the patient's medical record.

9. Documentation: Document the initiation of the secondary IV infusion, including the medication administered, infusion rate, volume infused, and patient response. Accurate documentation is essential for continuity of care and communication among healthcare providers.

10. Patient Education: Provide clear instructions to the patient regarding the purpose of the secondary IV infusion, potential side effects or adverse reactions, and measures to report any concerns or discomfort during the infusion.

By following these precautionary measures, nurses can help ensure the safe and effective administration of medications and fluids through secondary IV tubing with a pump, promoting positive patient outcomes and minimizing the risk of complications.

Frequently Asked Questions (FAQs)

1. How often should I change the IV tubing for the piggyback infusion?
• IV tubing should be changed according to hospital protocol or as per the manufacturer's instructions. Typically, it's recommended to change the tubing every 24 hours to minimize the risk of contamination and infection.

2. What should I do if there is air in the IV tubing during priming?
• If air is present in the IV tubing during priming, ensure all air bubbles are expelled before connecting the tubing to the patient's IV catheter. This can be done by gently tapping the tubing to dislodge air bubbles and then allowing the solution to flow until all air is removed.

3. What actions should I take if the IV pump alarms during the infusion?
• If the IV pump alarms during the infusion, assess the situation promptly. Common reasons for alarms include occlusions, air in the tubing, or infusion rate discrepancies. Address the issue according to hospital protocols and seek assistance from experienced staff if needed.

4. Can I administer multiple IV piggyback infusions simultaneously?
• Administering multiple IV piggyback infusions simultaneously requires careful consideration of compatibility, infusion rates, and patient safety. Consult with the healthcare team and follow established protocols to ensure safe administration.

5. What should I do if the patient experiences discomfort or pain at the IV site during the infusion?
• If the patient experiences discomfort or pain at the IV site during the infusion, assess the site for signs of complications such as infiltration or phlebitis. Adjust the infusion rate if necessary and provide appropriate interventions, such as warm compresses or repositioning the limb, to alleviate discomfort. If concerns persist, notify the healthcare provider for further evaluation.

Bottom Line

Setting up an IV piggyback pump requires attention to detail and adherence to established protocols. By following the step-by-step process outlined in this guide, you can ensure the safe and effective administration of medications to your patients.

Remember, if you ever have any questions or encounter challenges during the setup process, don't hesitate to seek guidance from your healthcare team. With practice and experience, you'll become proficient in setting up IV piggyback pumps and providing excellent patient care.
Article by
Sara Alvarado
Greetings, I'm Sara, a dedicated nurse and a proud contributor to the AutoInfu blog. With my firsthand experience in the world of infusion pumps, I'm here to provide you with the latest insights, expert advice, and essential updates to ensure you stay informed about the infusion pump industry.

Related Blogs

See All Posts
1 2 3 23
CAPTCHA image

Please type the characters

*By clicking this button, you agree to the terms of the privacy policy

Company

About usContact
info@autoinfu.com
(971) 209-2057‬
100-Money-Back-Guarantee-Infusion-Pump
Copyright © 2024 Autoinfu. All Rights Reserved.
Show Buttons
Share On Facebook
Share On Twitter
Share On Linkedin
Share On Pinterest
Hide Buttons